Services

Planned in daylight.
Judged after dark.

Everything below is low-voltage work: safe around kids, pets and mowers, and easy to extend later if you add to the yard.

Service 01

Lighting design

A plan before a purchase. We look at the architecture, the planting and the way you move around the property, then decide what deserves light.

  • On-site walkthrough and measurements
  • Fixture placement, beam spread and colour temperature
  • Transformer sizing and wire runs mapped out
  • A written quote with the fixture count broken down
Garden bed lighting with layered light and shadow
Low-voltage fixture and wire run set into a bed before backfill

Service 02

Installation

The part that decides whether a system lasts two years or twenty: connections, burial depth and load balance.

  • Wire buried and routed away from digging and edging
  • Weatherproof connections — no twist-on caps in the dirt
  • Transformer mounted, load balanced and timer programmed
  • Beds and turf restored before we leave

What we light

Where the fixtures usually go

Most projects are some mix of these. You don't have to do all of it at once.

Paths & steps

Walkways, driveways, stairs and level changes — the lighting that stops guests guessing where the edge is.

Trees & palms

Uplighting into a canopy, or moonlighting down through it. This is what gives a yard depth from the street.

House & entry

Grazing columns, washing walls, and making the front door obvious from the road after dark.

Pool, patio & deck

Enough light to use the space, low enough that nobody's staring into a bulb from a lounger.

Security & dark corners

Side yards, gates and blind spots — lit steadily rather than with a floodlight that blinds you.

Holiday & accent runs

Spare capacity and outlets planned in, so seasonal lighting doesn't mean extension cords across the lawn.

Already have a system?

Repairs, upgrades & maintenance

Landscape lighting fails in predictable places. Usually it's a connection, a transformer, or a fixture that got hit by a mower.

  • Dead runs traced and repaired
  • Halogen fixtures converted to LED
  • Transformer and timer replacement
  • Re-aiming and cleaning after landscaping grows in

Ask about a repair

Transformer and wiring installed at the side of a house

How it works

Four steps, in this order

1

You reach out

Call, text or send the form with rough details and your address.

2

Evening walkthrough

We meet near dusk and demo a fixture in place so you can see it, not imagine it.

3

Install day

Fixtures, wire and transformer go in, and the yard gets put back together.

4

Aim after dark

We return at night to fine-tune every angle. This step is not optional.

Free quotes

See what your yard looks like after dark

Send a few details and we'll set up a walkthrough. Most quotes come back within a couple of days.